Roof Replacement Asphalt Shingle Roofing Metal Roofing Standing Seam Stone Coated Steel Clay Tile Roofing New Roof Installation Roof Inspection Roof Repair Roof Maintenance Emergency Roof Repair Roof System Components Roof Financing

Stone Coated Steel Roofing in Houston

Stone-coated steel is an innovative roofing material combining thick steel with a 7-layer decorative and functional stone chip finish. These systems withstand regular 100+ degree Texas heat, and DECRA and Tilcor warrant them against blow-off in winds up to 120 mph and penetration by hailstones up to 2.5β€³ where a manufacturing defect is the cause. DECRA's tile profiles are listed at 130 to 160 pounds per square (100 square feet), depending on the profile and document, and Tilcor Antica at about 132 to 150; clay tile maker US Tile lists its clay tiles at approximately 590 to 1,070 pounds per square. Steel panels put less load on the framing than real tile does, so homeowners with asphalt roofs can consider a tile look. No document says what a given roof's framing can carry, though, so we check yours for the job.

Stone coated steel roofing Houston homeowners choose for a tile look: DECRA Villa profile

Stone Coated Steel Benefits

  • βœ… DECRA lifetime limited warranty β€” transferable once within the first 20 years
  • βœ… Hail resistance: Class 4 impact rated; 2.5β€³ hail-penetration warranty
  • βœ… Wind resistance: 120 mph manufacturer wind warranty
  • βœ… Weight: 130–160 lb per square for DECRA tile profiles, by document, vs 900 lb or more for standard-weight concrete or clay tile (Tile Roofing Industry Alliance)
  • βœ… Less load on the framing than real tile; we check the framing for your job
  • βœ… Available in tile, shake, or shingle profiles
  • βœ… DECRA and Tilcor certified installer

Available Stone Coated Steel Profiles

We install stone coated steel in multiple profiles to match your home's architecture: DECRA Villa (Spanish tile look), DECRA Shake (wood shake look), DECRA Shingle XD (architectural shingle look), DECRA Shake XD (hand-split shake look), and Tilcor Antica (Mediterranean tile look).

Stone Coated Steel: The Best of Both Worlds

Stone coated steel gives you the beauty of tile, shake, or slate with the performance of metal. Each panel is pressed steel coated with ceramic-bonded stone granules that look identical to traditional materials.

We install every DECRA and Tilcor profile β€” two of the leading stone coated steel brands in the world, and sister brands: IKO owns both and says its plant in Ennis, Texas now makes DECRA and Tilcor panels. As a certified installer for both, we follow each manufacturer's installation instructions, which their warranties require, and ensure your roof meets Texas wind code requirements.

DECRA or Tilcor: Which Profile Is Right for Your Home?

DECRA Villa Tile: Mimics Spanish-style barrel tile. Popular in Houston’s upscale neighborhoods. 120 mph manufacturer wind warranty, Class 4 hail impact resistance, lifetime limited warranty on single-family homes.

DECRA Shake: Replicates hand-split cedar shake without the fire risk or maintenance. Perfect for Houston’s Heights, Montrose, and Garden Oaks neighborhoods where the craftsman aesthetic is prized.

Tilcor CF Shingle: Affordable stone coated steel that looks like architectural shingles. Ideal for homeowners who want metal performance without the metal look. 120 mph manufacturer wind warranty, lifetime limited warranty on single-family homes.

Why Stone Coated Steel Suits Houston Weather

Houston roofs take three kinds of punishment: spring hail, thunderstorm wind, and months of heat and humidity. Stone coated steel answers each one differently than shingles or tile do. The steel core does not crack the way clay or concrete tile can when hail hits it, and it does not soften and lose granules in summer heat the way an aging asphalt shingle does. Because the panels interlock and are fastened to the roof, there are no loose tabs for a gust to catch.

Moisture is the quieter problem here. Real cedar shake soaks up water, grows moss in shaded yards, and eventually rots. A stone coated steel shake profile gives you the same textured look on a material that does not absorb water at all, which matters on lots under big live oaks and pines where roofs stay damp for days after a storm.

Stone Coated Metal Roofing vs. Shingles, Tile and Standing Seam

Most homeowners who call us about stone coated metal roofing are choosing between four options. Here is how they compare in plain terms:

  • Against asphalt shingles: stone coated steel keeps a familiar shingle or shake appearance but adds a steel core and a much longer manufacturer warranty. It costs more up front; see our stone coated steel roofing cost guide for what drives the price.
  • Against clay or concrete tile: you get a tile look at a small fraction of the weight, so many homes that were built for shingles can switch to a tile appearance without adding structural load. We still check the framing on every job.
  • Against standing seam: both are steel. Standing seam has smooth vertical panels and a modern look; stone coated steel hides the metal under a textured stone finish. If you want people to see a metal roof, choose standing seam. If you do not, choose stone coated.
  • Against a basic metal shingle: stamped metal shingles without the stone coating look like painted metal up close. The stone chip finish is what lets stone coated steel pass for tile, shake or an architectural shingle from the street. Our guide to a metal roof that looks like shingles walks through the shingle-style options.

How We Install Stone Coated Steel: Battens or Direct to Deck

Stone coated steel goes on in one of two ways. With a batten system, wood or metal battens are fastened across the deck and the panels hang on them. With a direct-to-deck system, the panels are fastened straight to the roof deck over the underlayment. We install both, and most of our stone coated roofs go direct to deck.

The method is not a matter of preference. It depends on the profile you pick and on what that manufacturer's installation instructions allow, because the warranty requires following them. Tilcor Antica, for example, is installed direct to deck. During your estimate we tell you which method your chosen profile uses and why, and the proposal spells it out.

HOAs and Stone Coated Steel in Houston Neighborhoods

Many Houston-area subdivisions and master-planned communities have deed restrictions that require architectural approval before a roof material or color changes. Stone coated steel often gets approved more easily than other metal roofs because, from the street, it reads as tile, shake or shingle rather than metal. Your HOA makes that call, not us, so plan on submitting a request before work starts. We provide the product specifications, profile details and physical color samples that an architectural committee typically asks to see.

Warranties: What the Manufacturer Covers and What We Cover

There are two separate warranties on a stone coated steel roof, and it helps to keep them apart. The manufacturer warranty from DECRA or Tilcor covers the product: a lifetime limited warranty on single-family homes, including coverage for blow-off in winds up to 120 mph and hail penetration up to 2.5 inches where a manufacturing defect is the cause. Read the actual warranty document for the exact terms of your profile.

Our own 10-year workmanship warranty covers the installation itself. Because we are certified by both DECRA and Tilcor, we install to each manufacturer's specifications so the product warranty stays valid. If you are deciding between brands, our DECRA roofing in Houston page covers the DECRA line in detail, and our comparison of DECRA Shingle XD vs Shake XD helps with the two most popular profiles.

Getting a Stone Coated Steel Roof Estimate

Every stone coated steel roofing Houston project we take on starts with a free roof inspection. We measure the roof, check the deck and framing, and bring DECRA and Tilcor samples so you can see the colors against your brick or siding in daylight. Your written quote typically arrives within 24 to 48 hours, and the price is locked when you sign the contract. If you would rather spread the cost out, roof financing is available through Acorn Finance, a third-party lender, for qualified homeowners.

Stone Coated Steel FAQ

A little, and that is normal. The ceramic-coated stone granules are bonded to the steel with an acrylic basecoat and sealed with an acrylic overglaze. Minor granule loss β€” mostly during installation, from foot traffic, or from hail β€” is expected and is not a cause for concern.

Yes. The panels are designed for foot traffic during installation and maintenance. We’ll show you the correct stepping pattern to avoid any cosmetic damage.

DECRA is one brand of stone coated steel. Tilcor is another, and both are owned by IKO, which says its plant in Ennis, Texas now makes DECRA and Tilcor panels. We are certified to install both, so we can show you profiles from each line and help you pick the one that fits your home and budget.

Many do, because from the street the roof looks like tile, shake or shingle rather than metal. Approval is up to your HOA's architectural committee, so submit a request before work starts. We give you the product specifications, profile details and color samples that committees usually ask for.

After a free inspection, your written quote typically arrives within 24 to 48 hours. It lists the profile, color, installation method and warranty details, and the price is locked once you sign the contract.

See stone coated steel in person. Photos don’t do these products justice. Call (832) 224-3435 to schedule a free consultation β€” we’ll bring DECRA and Tilcor samples to your home so you can see the colors, textures, and quality firsthand before making a decision.

Learn more about metal roofing standards from the Metal Roofing Alliance.

Learn more about metal roofing standards from the Metal Roofing Alliance.

Ready to Get Started?

Contact Houston's most trusted roofing contractor for a free, no-obligation estimate today.

Free Video or Voice Consultation

Skip the Hassle β€” Get Your Roof Quote in 24–48 Hours

No waiting around for multiple contractors to come bid your roof. One quick call is all it takes.

1

Book a time

Pick any slot that works for you β€” online and instant.

2

10-minute call

Free video or voice call. We answer your questions and gather what we need.

3

Quote in 24–48 hours

We email your price-locked quote β€” no pressure, no sales visit.

Book My Free Call β†’
FREE TOOL

Trace Your Roof. Get an Instant Price.

Use satellite imagery to outline your roof and receive a real installed price β€” no signup, no obligation.

Get Instant Roof Price β†’ Takes less than 60 seconds

πŸ”’ Free, no-obligation quote β€” Price-locked estimate in 24–48 hrs

πŸ“ž (832) 224-3435 Free Instant Quote
FREE Roof Calculator
FREE • NO SIGNUP

Get Your Instant
Roof Price

Trace your roof on satellite imagery and get a real installed price in under 60 seconds.

Open Roof Cost Calculator β†’

Powered by satellite roof measurement technology. No obligation.